access four-dimensional mode enable

Function

By default, the device interworks with an external device in three-dimensional mode.

This command is supported only on the NetEngine 8000 F1A.

Format

access four-dimensional mode enable

undo access four-dimensional mode enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

By default, the device exchanges interface information (such as option82 and Nas-port-id) with a DHCP or RADIUS server in three-dimensional mode. To enable the device to interwork with a DHCP or RADIUS server in four-dimensional mode, run the access four-dimensional mode enable command.

The access four-dimensional mode enable command takes effect only for new login users.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the device to interwork with an external device in four-dimensional mode.

<HUAWEI> system-view
[~HUAWEI] access four-dimensional mode enable