access user-flow-statistics

Function

The access user-flow-statistics enable command enables user traffic statistics collection based on inner or outer VLAN IDs on a device.

The undo access user-flow-statistics enable command disables user traffic statistics collection based on inner or outer VLAN IDs on a device.

By default, user traffic statistics collection based on inner or outer VLAN IDs on a device is not enabled.

This command is supported only on the NetEngine 8000 F1A.

access user-flow-statistics enable

undo access user-flow-statistics enable

None

System view

2: Configuration level

Task Name	Operations
bras-control	write

Usage Scenario

To enable user traffic statistics collection based on inner or outer VLAN IDs on a device, run the access user-flow-statistics enable command.

Configuration Impact

This command takes effect only for subsequent user traffic.

Follow-up Procedure

Run the display vlan-statistics command to check user traffic statistics based on a specified inner or outer VLAN ID on the device.

Precautions

In VS mode, this command is supported only by the admin VS.

# Enable user traffic statistics collection based on inner or outer VLAN IDs on a device.

<HUAWEI> system-view
[~HUAWEI] access user-flow-statistics enable