access user-group outbound enable

Function

The access user-group outbound enable command enables downstream packets to carry the source user's user-group ID in upstream packets.

The undo access user-group outbound enable command disables downstream packets from carrying the source user's user-group ID in upstream packets.

By default, downstream packets do not carry the source user's user-group ID in upstream packets.

This command is supported only on the NetEngine 8000 F1A.

Format

access user-group outbound enable

undo access user-group outbound enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

In user-to-user scenarios, to match downstream packets against UCLs based on the source user's user-group ID, run the access user-group outbound enable command to allow downstream packets to carry the source user's user-group ID in upstream packets. By default, downstream packets do not carry the source user's user-group ID. Therefore, downstream packets cannot be matched against UCLs based on the source user's user-group ID.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable downstream packets to carry the source user's user-group ID in upstream packets.

<HUAWEI> system-view
[~HUAWEI] access user-group outbound enable