The accounting-service-policy command applies a DAA traffic policy globally.
The undo accounting-service-policy command restores the default configuration.
By default, no DAA traffic policy is applied globally.
This command is supported only on the NetEngine 8000 F1A.
Usage Scenario
To apply a DAA traffic policy globally, run the accounting-service-policy command.
Prerequisites
A DAA traffic policy has been configured, and a traffic classifier and traffic behavior have been bound to the policy.
Precautions
This command is supported only on the admin VS.
The accounting-service-policy and classifier behavior <behavior-name> [ precedence <precedence-value> ] commands are mutually exclusive.<HUAWEI> system-view <HUAWEI> user-group u1 [~HUAWEI] acl 6000 [*HUAWEI-ucl-6000] rule permit ip source user-group u1 destination ip-address 10.0.0.0 0.0.255.255 [*HUAWEI-ucl-6000] quit [*HUAWEI] traffic classifier c1 [*HUAWEI-classifier-c1] if-match acl 6000 [*HUAWEI-classifier-c1] quit [*HUAWEI] traffic behavior b1 [*HUAWEI-behavior-b1] tariff-level 1 [*HUAWEI-behavior-b1] quit [*HUAWEI] traffic policy p1 [*HUAWEI-trafficpolicy-p1] classifier c1 behavior b1 [*HUAWEI-trafficpolicy-p1] commit [~HUAWEI-trafficpolicy-p1] quit [~HUAWEI] accounting-service-policy p1