acl ipv6-pool

Function

The acl ipv6-pool command creates an ACL IPv6 address pool and enters the ACL IPv6 address pool view.

The undo acl ipv6-pool command deletes an ACL IPv6 address pool.

By default, no ACL IPv6 address pool is created on the device.

Format

acl ipv6-pool pool-name

undo acl ipv6-pool pool-name

undo acl ipv6-pool

Parameters

Parameter	Description	Value
pool-name	Specifies the name of an ACL IPv6 address pool.	The value is a string of 1 to 32 case-sensitive characters, spaces not supported. The value can be any combination of letters, digits, dots (.), or underscores (_).

Parameter

Description

Value

pool-name

Specifies the name of an ACL IPv6 address pool.

The value is a string of 1 to 32 case-sensitive characters, spaces not supported. The value can be any combination of letters, digits, dots (.), or underscores (_).

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
acl	write

Usage Guidelines

Usage Scenario

In typical ACL6 usage scenarios such as QoS or security service, to filter traffic based on the source IPv6 addresses of BGP peers, run the acl ipv6-pool command to create an ACL IPv6 address pool.

Follow-up Procedure

Run the apply bgp-peer command to associate IPv6 addresses of BGP peers with the ACL IPv6 address pool.

Precautions

Currently, the device only supports IPv6 address pools for advance ACLs.

Example

# Create the ACL IPv6 address pool named test.

<HUAWEI> system-view
[~HUAWEI] acl ipv6-pool test