active port-evpn

Function

The active port-evpn command activates EVPN interface licenses for a board in batches.

The undo active port-evpn command deactivates EVPN interface licenses for a board in batches.

By default, EVPN interface licenses are not activated for a board.

Format

active port-evpn slot slot-id card card-id port port-list

undo active port-evpn slot slot-id card card-id [ port port-list ]

Parameters

Parameter Description Value
card card-id

Specifies a subcard ID.

The value is an integer. The value depends on the subcard status on the device.

port port-list

Specifies the interface list of a board, with the interfaces separated by commas (,) or hyphens (-).

The value is a string of 1 to 255 case-sensitive characters, spaces not supported.

slot slot-id

Specifies the slot ID of a board.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Views

License view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
l2vpn write

Usage Guidelines

Usage Scenario

The EVPN service can be configured on a board only after EVPN interface licenses are activated for the board.

Prerequisites

  • The license file for the master control board has been activated using the license active command.
  • The interface-specific basic hardware licenses for the board have been activated in batches using the active port-basic slot card port command.

Precautions

This command applies only to the Admin-VS.

Example

# Deactivate EVPN interface licenses in batches.
<HUAWEI> system-view
[~HUAWEI] license
[*HUAWEI-license] undo active port-evpn slot 1 card 0 port 0-8
# Activate EVPN interface licenses in batches.
<HUAWEI> system-view
[~HUAWEI] license
[*HUAWEI-license] active port-evpn slot 1 card 0 port 0-8
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >