Usage Scenario
Run the active port-slicing command to activate the port slicing license first. To deactivate the port slicing license, run the undo active port-slicing command. You can deactivate a license of a specific interface. If you do not specify an interface when deactivating a license, all the licenses on the board in the slot are deactivated.
Prerequisites
Before deactivating the port slicing license, the undo mode channel enable command has been run to cancel the channelized sub-interface configuration.
The undo flexethmode enable port command has been run to switch the interface from the FlexE mode to the standard Ethernet mode.
Before configuring the FlexE port license, the license file on the master main control board has been activated using the
license active file-name command.
Configuration Impact
After the command is configured, if the license resources are insufficient, the port slicing function may not be activated on some interfaces, and the status of these interfaces is allocate.