advertise link attributes

Function

The advertise link attributes command enables the IS-IS process to advertise link attribute TLVs in LSPs. The link attribute includes an IP address and an interface index.

The undo advertise link attributes command disables the IS-IS process from releasing link attribute TLVs in LSPs.

By default, the link attribute advertisement function is disabled on an IS-IS process.

Format

advertise link attributes

undo advertise link attributes

Parameters

None

Views

IS-IS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
isis	write

Usage Guidelines

Usage Scenario

To enable the IS-IS process to advertise link attributes, run the cost-style command in the IS-IS view to set the cost type of IS-IS packets to wide, compatible, or wide-compatible.

This command is used to control the attribute advertisement of TLV 22, and the IPv4 address family of the corresponding link must be active.

Example

# Enable the IS-IS process to advertise link attribute-related TLVs on the LSP.

<HUAWEI> system-view
[~HUAWEI] isis 1
[*HUAWEI-isis-1] cost-style wide
[*HUAWEI-isis-1] advertise link attributes