agetime

Function

The agetime command sets the aging time of an NQA test.

The undo agetime command restores the default aging time.

By default, the aging time of an NQA test is 0, indicating that the test is not aged.

Format

agetime ageTimeValue

undo agetime

Parameters

Parameter	Description	Value
ageTimeValue	Specifies the aging time of an NQA test.	The value is in the format of HH:MM:SS. The HH value ranges from 0 to 23, and the MM and SS values range from 0 to 59.

Parameter

Description

Value

ageTimeValue

Specifies the aging time of an NQA test.

The value is in the format of HH:MM:SS. The HH value ranges from 0 to 23, and the MM and SS values range from 0 to 59.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

To prevent endless running of a test instance, age the test instance periodically. The agetime command can be used to set the aging time to change the survival time of a test instance in the system.

The aging time is started when the NQA test instance is in the inactive state. When the aging time expires, the system deletes the NQA test instance automatically.
The aging time is reset when the NQA test instance is in the active state.

Prerequisites

Before using the agetime command, run the test-type command to specify a test instance type.

Precautions

If parameters need to be changed during the running of the test instance, the system prompts you whether to terminate the test instance. Press "Y" or "N" as required.

If you press "Y", the test instance is terminated and parameters changed. The settings take effect after being committed. To restart the test instance, run the start command.
If you press "N", the test instance keeps running, and the parameters fail to be modified.

Example

# Set the aging time of the NQA test named user test.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type icmp
[*HUAWEI-nqa-user-test] agetime 1:0:0