alarm ipv6 nd attack disable

Function

The alarm ipv6 nd attack disable command disables the alarm function for ND VLAN CAR.

The undo alarm ipv6 nd attack disable command enables the alarm function for ND VLAN CAR.

By default, the alarm function is enabled for ND VLAN CAR.

Format

alarm ipv6 nd { na | ns-multicast | ns-unicast } attack disable

undo alarm ipv6 nd { na | ns-multicast | ns-unicast } attack disable

Parameters

Parameter	Description	Value
na	NA packets.	-
ns-multicast	NS-MULTICAST packets.	-
ns-unicast	NS-NUICAST packets.	-

Parameter

Description

Value

NA packets.

ns-multicast

NS-MULTICAST packets.

ns-unicast

NS-NUICAST packets.

Views

Slot view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
soc	write

Usage Guidelines

Usage Scenario

To disable the alarm function for ND VLAN CAR, run the alarm ipv6 nd attack disable command. To enable the alarm function for ND VLAN CAR, run the undo alarm ipv6 nd attack disable command.

In VS mode, this command is supported only by the admin VS.

Example

# Disable the NA alarm function for ND VLAN CAR on the board in slot 1.

<HUAWEI> system-view
[~HUAWEI] slot 1
[*HUAWEI-slot-1] alarm ipv6 nd na attack disable