any-address-release offline

Function

The any-address-release offline command configures a device to forcibly log out a dual-stack user if the user releases any IP address.

The undo any-address-release offline command restores the default configuration.

By default, a device does not forcibly log out a dual-stack user when the user releases an IP address.

This command is supported only on the NetEngine 8000 F1A.

Format

any-address-release offline

undo any-address-release offline

Parameters

None

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

A dual-stack user remains online so long as the user has at least one available IP address. If you want a device to forcibly log out a dual-stack user when the user releases any IP address, run the any-address-release offline command.

NOTE:

This command applies to only PPPoX users.

Precautions

In VS mode, this command is supported only by the admin VS.

The ppp address-release separate and any-address-release offline commands are mutually exclusive.

This command is used to process DHCPv6 Release messages on clients. By default, DHCPv6 Release messages on clients are not processed.

Example

# Configure a device to forcibly log out a dual-stack user in domain1 when the user releases an IP address.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain domain1
[*HUAWEI-aaa-domain-domain1] any-address-release offline