The arp host ip-conflict-check command configures a detection option for host IP address conflicts.
The undo arp host ip-conflict-check command cancels the configured detection option.
By default, host IP address conflicts are detected within a period of 180 seconds and and threshold for host IP address conflicts as five times.
| Parameter | Description | Value |
|---|---|---|
| retry-times retry-times-value |
Specifies a threshold for host IP address conflicts. |
The value is an integer ranging from 1 to 1000. |
| period period-value |
Specifies the period for host IP address conflict detection. |
The value is an integer ranging from 2 to 36000, in seconds. |
Usage Scenario
To configure host IP address conflict check options, run the arp host ip-conflict-check command. The system counts the number of IP address conflicts in ARP entries learned between the local and remote ends or between different local interfaces. If the number of IP address conflicts is greater than or equal to the configured threshold for IP address conflicts within a specified period, the system reports a host IP address conflict alarm.
If no IP address conflict occurs on the host that reports a host IP address conflict alarm for 10 consecutive minutes, the alarm is cleared.