shutdown (Maintenance assistant task view)

Function

The shutdown command stops a maintenance assistant.

The undo shutdown command enables a maintenance assistant.

By default, physical interfaces are initialized and started after a device is powered on.

shutdown

undo shutdown

None

Maintenance assistant task view

3: Management level

Task Name	Operations
ops	write

Usage Scenario

To stop a maintenance assistant, run the shutdown command.

Configuration Impact

Services on the interface are intermittently interrupted after the shutdown command is run on the interface.

# Shutdown the maintenance assistant config.

<HUAWEI> system-view
[~HUAWEI] ops
[~HUAWEI-ops] assistant config
[*HUAWEI-ops-assistant-config] shutdown