auto-report

Function

The auto-report command enables the automatic NE report function.

The undo auto-report command disables the automatic NE report function.

By default, the automatic NE report function is disabled.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

auto-report

undo auto-report

Parameters

None

Views

DCN view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dcn	write

Usage Guidelines

Usage Scenario

To enable a gateway network element (GNE) to automatically report a new NE's information to an NMS, run the auto-report command so that the network management system (NMS) can manage the new NE promptly.

Prerequisites

The DCN feature has been enabled globally using the dcn command in the system view.

In VS mode, this command is supported only by the admin VS.

Example

# Enable the automatic NE report function.

<HUAWEI> system-view
[~HUAWEI] dcn
[*HUAWEI-dcn] auto-report