bandwidth (VLANIF interface view)

Function

The bandwidth command sets the bandwidth of a VLANIF interface.

The undo bandwidth command deletes the configured bandwidth of a VLANIF interface.

By default, the bandwidth of a VLANIF interface is 1000 Mbits/s.

Format

bandwidth bandwidth

bandwidth bandwidth kbps

undo bandwidth

undo bandwidth bandwidth [ kbps ]

Parameters

Parameter	Description	Value
bandwidth	Specifies the bandwidth of a VLANIF interface.	The value ranges from 1 to 1000000, in Mbits/s.
kbps	Kbits/sec.	-

Parameter

Description

Value

bandwidth

Specifies the bandwidth of a VLANIF interface.

The value ranges from 1 to 1000000, in Mbits/s.

kbps

Kbits/sec.

Views

VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vlan	write

Usage Guidelines

Usage Scenario

The bandwidth command mainly ensures that the network management station (NMS) can acquire the bandwidth of the VLANIF interface. The NMS can check the interface bandwidth through the two objects ifSpeed and ifHighSpeed in IF-MIB.

If the configured bandwidth is smaller than 4000 Mbit/s, ifSpeed and ifHighSpeed are respectively displayed as bandwidth x 1000 x 1000 and bandwidth.
If the configured bandwidth is equal to or larger than 4000 Mbit/s, ifSpeed and ifHighSpeed are respectively displayed as 4294967295 (0XFFFFFFFF) and bandwidth.

Example

# Set the bandwidth of VLANIF 2 to 10000 Mbits/s.

<HUAWEI> system-view
[~HUAWEI] vlan 2
[*HUAWEI-vlan2] quit
[*HUAWEI] interface vlanif 2
[*HUAWEI-Vlanif2] bandwidth 10000

# Set the bandwidth of VLANIF 2 to 10000 Kbits/s.

<HUAWEI> system-view
[~HUAWEI] vlan 2
[*HUAWEI-vlan2] quit
[*HUAWEI] interface vlanif 2
[*HUAWEI-Vlanif2] bandwidth 10000 kbps