bas-interface-name

Function

The bas-interface-name command sets the name of the BAS interface.

The undo bas-interface-name command restores the default setting.

By default, the name of the BAS interface is null.

This command is supported only on the NetEngine 8000 F1A.

Format

bas-interface-name name

undo bas-interface-name

Parameters

Parameter	Description	Value
name	Specifies the name of the BAS interface.	The value is a string of 1 to 32 characters.

Parameter

Description

Value

name

Specifies the name of the BAS interface.

The value is a string of 1 to 32 characters.

Views

BAS interface view (GE), BAS interface view (VE), BAS interface view (trunk)

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

The bas-interface-name command is only used to set the BAS interface name and has no special function.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the name of the BAS interface GE0/1/9 to huawei.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/9
[~HUAWEI-GigabitEthernet0/1/9] commit
[~HUAWEI-GigabitEthernet0/1/9] bas
[~HUAWEI-GigabitEthernet0/1/9-bas] commit
[~HUAWEI-GigabitEthernet0/1/9-bas] bas-interface-name huawei