active-route-advertise (BGP view)

Function

The active-route-advertise command enables BGP to advertise only the selected routes in the IP routing table.

The undo active-route-advertise command restores the default setting.

By default, BGP advertises all selected routes in the BGP routing table to peers.

Format

active-route-advertise

undo active-route-advertise

Parameters

None

Views

BGP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

By default, BGP advertises all selected routes in the BGP routing table to peers. After the active-route-advertise command is configured, only the routes selected by BGP and also active at the routing management layer are advertised to peers.

Precautions

The active-route-advertise and routing-table rib-only commands are mutually exclusive.

Example

# Enable BGP to advertise only the selected routes in the IP routing table to peers.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] active-route-advertise