The peer advertise-community command configures a device to advertise a community attribute to its peer group.
The undo peer advertise-community command cancels the existing configuration.
By default, a device advertises no community attribute to its peer group.
Usage Scenario
The peer advertise-community command is used to configure a device to advertise a community attribute to its peer group. If a device advertises a community attribute to its peer group, all the members of the peer group will inherit the configuration. This simplifies the application of routing policies and facilitates route maintenance and management.
Precautions
Before running the peer advertise-community command to advertise BGP community attributes, you can use a routing policy to define specific community attributes.
<HUAWEI> system-view [~HUAWEI] ip vpn-instance vpna [*HUAWEI-vpn-instance-vpna] ipv4-family [*HUAWEI-vpn-instance-vpna-af-ipv4] route-distinguisher 100:1 [*HUAWEI-vpn-instance-vpna-af-ipv4] vpn-target 111:1 both [*HUAWEI-vpn-instance-vpna-af-ipv4] quit [*HUAWEI-instance-vpna] quit [*HUAWEI] bgp 100 instance a [*HUAWEI-bgp-instance-a] ipv4-family vpn-instance vpna [*HUAWEI-bgp-instance-a-vpna] group test [*HUAWEI-bgp-instance-a-vpna] peer test advertise-community