peer log-change (BGP multi-instance VPN instance IPv4 address family view) (group)

Function

The peer log-change command enables a BGP device to log the session status and events of a specified group.

The undo peer log-change command cancels the configuration.

By default, a BGP device is enabled to log the session status and events of a specified peer group.

Format

peer group-name log-change

undo peer group-name log-change

Parameters

Parameter	Description	Value
group-name	Specifies the name of a peer group.	The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

group-name

Specifies the name of a peer group.

The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

BGP multi-instance VPN instance IPv4 address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

The peer log-change command can be used to enable a device to log the session status and events of a specified peer group, facilitating service management.

Example

# Configure a BGP device to log the session status and events of peer group.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance vpna
[*HUAWEI-vpn-instance-vpna] ipv4-family
[*HUAWEI-vpn-instance-vpna-af-ipv4] route-distinguisher 100:1
[*HUAWEI-vpn-instance-vpna-af-ipv4] vpn-target 111:1 both
[*HUAWEI-vpn-instance-vpna-af-ipv4] quit
[*HUAWEI-instance-vpna] quit
[*HUAWEI] bgp 100 instance a
[*HUAWEI-bgp-instance-a] ipv4-family vpn-instance vpna
[*HUAWEI-bgp-instance-a-vpna] group test
[*HUAWEI-bgp-instance-a-vpna] peer test log-change