block

Function

The block command blocks a board.

The undo block command unblocks a board.

By default, a board is unblocked.

This command is supported only on the NetEngine 8000 F1A.

block

undo block

None

Slot view

2: Configuration level

Task Name	Operations
bras-control	write

Usage Scenario

The block command blocks a board.

The undo block command unblocks a board.

Precautions

In VS mode, this command is supported only by the admin VS.

# Block the board in slot 1.

<HUAWEI> system-view
[~HUAWEI] slot 1
[*HUAWEI-slot-1] block