display this

Function

The display this command displays the configurations of the system in the current view.

display this [ include-default ]

Parameter	Description	Value
include-default	Displays both the configurations that users have performed and default configurations.	-

Parameter

Description

Value

include-default

Displays both the configurations that users have performed and default configurations.

All views

1: Monitoring level

Task Name	Operations
config	execute

Usage Scenario

After a set of configurations are complete in a certain view, you can run the display this command to check whether the configurations are correct.
The effective parameters the same as the default parameters are not displayed. The set parameters that do not be committed successfully are neither displayed.
Note the following points when using the display this command:
- If include-default is not specified, the command displays only user-configured information.
- If include-default is specified, the command displays both user-configured information and default configuration information.
Offline configuration is marked using an asterisk (*).

Precautions

In the view of a specific interface, the display this command displays the configurations of the interface.
In the view of a specific protocol, this command displays the configurations associated with the protocol.
In the sub-view of a protocol, no configuration is displayed after this command is run.

The actual command output varies according to the device. The command output here is only an example.

# Display the effective parameters in the current view on the device.

<HUAWEI> system-view
[~HUAWEI] display this
#
sysname HUAWEI
#
return

# Display the configurations that take effect in the current view on the device and default configurations. (The command output is not all listed.)

<HUAWEI> system-view
[~HUAWEI] display this include-default
#
sysname HUAWEI
#
undo command-privilege level rearrange
#
FTP server port 21