ma

Function

The ma command creates an MA and displays the MA view.

The undo ma command deletes an MA.

By default, no MA is created in MD.

Format

ma ma-name [ format { icc-based iccbased-ma-format-name | string ma-format-name } ]

undo ma [ ma-name ]

Parameters

Parameter	Description	Value
ma-name	Specifies the name of an MA. Different MAs in an MD cannot have the same name.	The value is a string of 1 to 43 case-sensitive characters. Question marks (?) are not supported. The total length of MA and MD names must be no greater than 44 characters.
format	Indicates the format of the MA name carried in CCMs to be sent. The default format is string.	-
icc-based iccbased-ma-format-name	Specifies an ICC-based MA name carried in CCMs to be sent. ITU carrier codes (ICCs) are assigned to network carriers or service providers and maintained by ITU-T Telecommunication Standardization Bureau (TSB) in compliance with ITU-T M.1400 Recommendation.	The value is a string of 1 to 13 case-sensitive characters. Question marks (?) are not supported.
string ma-format-name	Specifies a string-based MA name carried in CCMs to be sent.	The value is a string of 1 to 43 case-sensitive characters. Question marks (?) are not supported.

Views

MD view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

The ma command can be used to configure an MA. CFM can be configured on devices in the MA to monitor link connectivity when services are deployed based on VLANs or VSIs.

Prerequisites

An MD has been configured using the cfm md command.

Example

# Create an MA named ma1.

<HUAWEI> system-view
[~HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1