cfm mac-level check disable

Function

The cfm mac-level check disable command disables the device from checking the LEVEL field in the EOAM multicast MAC address information.

The undo cfm mac-level check disable command enables the device to check the LEVEL field in the EOAM multicast MAC address information.

By default, the device is enabled to check the LEVEL field in the EOAM multicast MAC address information.

Format

cfm mac-level check disable

undo cfm mac-level check disable

Parameters

None

Views

Slot view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
y1731 write

Usage Guidelines

Usage Scenario

By default, the device is enabled to check the LEVEL field in the EOAM multicast MAC address information. If a device for connecting to the device does not check the LEVEL field in the EOAM multicast MAC address information, the NetEngine 8000 F fails to connect to the device. To resolve this issue, run the cfm mac-level check disable command to disable the NetEngine 8000 F from checking the LEVEL field in the EOAM multicast MAC address information.

Example

# Disable the device from checking the LEVEL field in the EOAM multicast MAC address information.
<HUAWEI> system-view
[~HUAWEI] slot 1
[~HUAWEI-slot-1] cfm mac-level check disable
Parent Topic: CFM Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >