tunnel-policy nonexistent-config-check

Function

The tunnel-policy nonexistent-config-check command controls whether the system allows a nonexistent tunnel policy to be specified in a command.

The undo tunnel-policy nonexistent-config-check disable command forbids a nonexistent tunnel policy to be specified in a command.

By default, the system does not allow a nonexistent tunnel policy to be specified in a command.

Format

tunnel-policy nonexistent-config-check disable

tunnel-policy nonexistent-config-check enable

undo tunnel-policy nonexistent-config-check disable

Parameters

Parameter Description Value
enable

Indicates that the system does not allow a nonexistent tunnel policy to be specified in a command.

-
disable

Indicates that the system allows a nonexistent tunnel policy to be specified in a command.

-

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
tunnel-policy write

Usage Guidelines

Usage Scenario

By default, if you specify a nonexistent tunnel policy in a command, the command does not take effect. To enable the system to allow a nonexistent tunnel policy to be specified in a command, run the tunnel-policy nonexistent-config-check disable command.

Example

# Enable the system to allow a nonexistent tunnel policy to be specified in a command.
<HUAWEI> system-view
[~HUAWEI] tunnel-policy nonexistent-config-check disable
Parent Topic: VPN Tunnel Management Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >