client acl

Function

The client acl command configures an ACL rule referenced by TWAMP.

The undo client acl command cancels an ACL rule referenced by TWAMP.

By default, no ACL rule referenced by TWAMP is created.

client acl aclnumBasic

client acl aclnumAdv

client acl aclname

undo client acl

Parameter	Description	Value
aclnumBasic	Specifies a basic ACL number referenced by TWAMP.	The value is an integer ranging from 2000 to 2999.
aclnumAdv	Specifies an advanced ACL number referenced by TWAMP.	The value is an integer ranging from 3000 to 3999.
aclname	Specifies an ACL name referenced by TWAMP.	The value is a string of 1 to 64 case-sensitive characters without spaces. The value must start with a letter (a to z or A to Z, case sensitive).

Parameter

Description

Value

aclnumBasic

Specifies a basic ACL number referenced by TWAMP.

The value is an integer ranging from 2000 to 2999.

aclnumAdv

Specifies an advanced ACL number referenced by TWAMP.

The value is an integer ranging from 3000 to 3999.

aclname

Specifies an ACL name referenced by TWAMP.

The value is a string of 1 to 64 case-sensitive characters without spaces. The value must start with a letter (a to z or A to Z, case sensitive).

TWAMP server view

2: Configuration level

Task Name	Operations
twamp	write

Usage Scenario

To configure a restriction on client access to a TWAMP server, run the client acl command to configure an ACL rule referenced by TWAMP.

# Configure an ACL rule referenced by TWAMP.

<HUAWEI> system-view
[~HUAWEI] acl 3333
[*HUAWEI] nqa twamp
[*HUAWEI-twamp] server
[*HUAWEI-twamp-srv] client acl 3333