clock alarm-threshold frequency-offset

Function

The clock alarm-threshold frequency-offset command configures an alarm threshold for frequency offset at the physical layer.

The undo clock alarm-threshold frequency-offset command restores the default configuration.

By default, the alarm threshold for frequency offset at the physical layer is 9200 ppb.

clock alarm-threshold frequency-offset frequency-offset-value

undo clock alarm-threshold frequency-offset [ frequency-offset-value ]

Parameter	Description	Value
frequency-offset-value	Specifies an alarm threshold for frequency offset at the physical layer.	The value is an integer ranging from 10 to 92, in 100 ppb.

Parameter

Description

Value

frequency-offset-value

Specifies an alarm threshold for frequency offset at the physical layer.

The value is an integer ranging from 10 to 92, in 100 ppb.

System view

2: Configuration level

Task Name	Operations
clksync	write

Usage Scenario

To configure an alarm threshold for frequency offset at the physical layer, run the clock alarm-threshold frequency-offset command.

In VS mode, this command is supported only by the admin VS.

# Configure the alarm threshold for frequency offset at the physical layer as 2000 ppb.

<HUAWEI> system-view
[~HUAWEI] clock alarm-threshold frequency-offset 20