clock source internal clock-id

Function

The clock source internal clock-id command configures a clock ID for an internal clock source.

The undo clock source internal clock-id command restores the clock ID for an internal clock source.

The default clock ID of an internal clock source is 0. If you have enabled the extended SSM function for an internal clock source, this internal clock source cannot participate in clock source selection.

Format

clock source internal clock-id clockid-value

undo clock source internal clock-id

Parameters

Parameter Description Value
clockid-value

Clock ID of an internal clock source.

The value is an integer ranging from 1 to 15.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
clksync write

Usage Guidelines

Usage Scenario

When the extended SSM function is enabled, configure a clock ID for an internal clock source on all devices that reside in both chain and ring networks or two ring networks to prevent clock loops.

Example

# Set the clock ID to 10 for an internal clock source.
<HUAWEI> system-view
[~HUAWEI] clock source internal clock-id 10
Parent Topic: Physical Layer Clock Synchronization Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >