clock synchronization enable

Function

The clock synchronization enable command enables clock synchronization for a line clock source.

The undo clock synchronization enable command disables clock synchronization for a line clock source.

By default, clock synchronization is disabled for a line clock source.

Format

clock synchronization enable

undo clock synchronization enable

Parameters

None

Views

100GE interface view, 10G LAN interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE interface view, FlexE-100G interface view, FlexE-400G interface view, FlexE-50G interface view, GE optical interface view, GE electrical interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
clksync	write

Usage Guidelines

Usage Scenario

To enable a line clock source to participate in clock source selection, enable clock synchronization for this line clock source.

Example

# Enable clock synchronization for a line clock source.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] clock synchronization enable