condition-relation

Function

The condition-relation command configures a logical operation mode between filter criteria in a filter.

The undo condition-relation command restores the default configuration.

The default logical operation mode between filter criteria in a filter is AND.

Format

condition-relation { or | and }

undo condition-relation [ and | or ]

Parameters

Parameter	Description	Value
or	Indicates that the logical operation mode between filter criteria is OR.	-
and	Indicates that the logical operation mode between filter criteria is AND.	-

Parameter

Description

Value

Indicates that the logical operation mode between filter criteria is OR.

and

Indicates that the logical operation mode between filter criteria is AND.

Views

Telemetry filter view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
telemetry	write

Usage Guidelines

Usage Scenario

Multiple filter criteria can be configured for the same filter of a sampling path. The final filter criteria can be determined only after logical operations are performed between these filter criteria. To perform logical operations between multiple filter criteria, you must run the condition-relation command to configure a logical operation mode between these filter criteria.

Prerequisites

A filter has been created using the filter command.

Example

# Set a logical operation mode between filter criteria in a filter named abc to OR.

<HUAWEI> system-view
[~HUAWEI] telemetry
[~HUAWEI-telemetry] sensor-group 1
[~HUAWEI-telemetry-sensor-group-1] sensor-path huawei-ifm:ifm self-defined-event
[*HUAWEI-telemetry-sensor-group-1-self-defined-event-path] filter abc
[*HUAWEI-telemetry-sensor-group-1-self-defined-event-path-filter-abc] condition-relation or