evpl instance

Function

The undo evpl instance command deletes an EVPL instance.

The undo evpl instance command deletes an EVPL instance.

By default, no EVPL instance is created.

Format

evpl instance instance-value vxlan-mode

evpl instance instance-value

undo evpl instance instance-value vxlan-mode

undo evpl instance instance-value

Parameters

Parameter	Description	Value
instance-value	Specifies an EVPL instance ID.	The value is an integer that ranges from 1 to 16777215.
vxlan-mode	Specifies the VXLAN mode for an EVPL instance.	-

Parameter

Description

Value

instance-value

Specifies an EVPL instance ID.

The value is an integer that ranges from 1 to 16777215.

vxlan-mode

Specifies the VXLAN mode for an EVPL instance.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
evpl	write

Usage Guidelines

Usage Scenario

In an E-Line scenario, an EVPL instance has been created using the evpl instance command. Devices send EVI AD routes to each other so that each device generates forwarding entries for association between EVPL instances and access-side interfaces, MPLS tunnels, SRv6 tunnels, and EVPL instances. In this way, EVPN VPWS over MPLS/SRv6 leased line services are implemented.

In an E-Line scenario where a VXLAN tunnel is used for user access, a P2P VXLAN tunnel needs to be created to transmit user packets. To terminate a P2P VXLAN tunnel on a PW-VE interface, run the evpl instance vxlan-mode command to create an EVPL instance in VXLAN mode. A P2P VXLAN tunnel is bound to an EVPL instance through a VNI, and the EVPL instance is bound to a PW-VE interface. In this way, the P2P VXLAN tunnel is associated with the PW-VE interface.

Example

# Create an EVPL instance in VXLAN mode with the ID being 2.

<HUAWEI> system-view
[~HUAWEI] evpl instance 2 vxlan-mode

# Create an EVPL instance with the ID being 1.

<HUAWEI> system-view
[~HUAWEI] evpl instance 1