cui enable

Function

The cui enable command enables users in a domain to apply to the RADIUS server for the CUI attribute when requesting to get online, and then adds the CUI attribute to the subsequent user accounting packets.

The undo cui enable command cancels the configuration.

By default, this configuration is disabled.

Format

cui enable

undo cui enable

Parameters

None

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

After this function is configured for an AAA domain, users in the AAA domain will apply to the RADIUS server for the CUI attribute by sending authentication request packets. The RADIUS server then sends the authentication response packet carrying the CUI attribute to the users.

This command is applicable only when users in a domain adopt RADIUS authentication and RADIUS accounting.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the user named kouki to apply to the RADIUS server for the CUI attribute when requesting to get online.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain kouki
[*HUAWEI-aaa-domain-kouki] commit
[~HUAWEI-aaa-domain-kouki] cui enable