daa-user resource-insufficient

Function

The daa-user resource-insufficient command enables the system to force a DAA user to log out if the DAA user fails to apply for resources.

The undo daa-user resource-insufficient command restores the default value.

By default, the system keeps the user online when the user's request fails.

This command is supported only on the NetEngine 8000 F1A.

Format

daa-user resource-insufficient { { inbound | outbound } ^* | both } offline

undo daa-user resource-insufficient

Parameters

Parameter	Description	Value
inbound	Specifies insufficient upstream resources.	-
outbound	Specifies insufficient downstream resources.	-
both	Specifies insufficient upstream and downstream resources.	-
offline	Specifies that users get offline.	-

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

The daa-user resource-insufficient command and the undo daa-user resource-insufficient command are used to configure the system to keep the user online or force the user to log out when the user's request fails.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the system to force the user to log out when the user's inbound and outbound requests fail.

<HUAWEI> system-view
[~HUAWEI] daa-user resource-insufficient both offline