databits

Function

The databits command configures the number of data bits of a user interface.

The undo databits command restores the default number of data bits of a user interface.

By default, the default number of data bits of a user interface is 8.

Format

databits databitvalue

undo databits

Parameters

Parameter	Description	Value
databitvalue	Sets the number of data bits.	The value is an enumerated type, which is 5, 6, 7 or 8.

Parameter

Description

Value

databitvalue

Sets the number of data bits.

The value is an enumerated type, which is 5, 6, 7 or 8.

Views

VTY-type user interface view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
tty	write

Usage Guidelines

Usage Scenario

If the number of data bits configured on a device is different from that configured on the terminal emulation program, run the databits command to configure the number of data bits on the device to be the same as that on the terminal emulation program.

You are advised to use the default number of data bits of a user interface.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the number of data bits of a console user interface to 7.

<HUAWEI> system-view
[~HUAWEI] user-interface console 0
[~HUAWEI-ui-console0] databits 7