ipfpm tlp

Function

The ipfpm tlp command binds a Target Logical Port (TLP) to an interface.

The undo ipfpm tlp command unbinds a TLP from an interface.

By default, a TLP is not bound to any interface.

Format

ipfpm tlp tlp-id

undo ipfpm tlp { tlp-id | all }

Parameters

Parameter	Description	Value
tlp-id	Specifies a TLP ID.	The value is an integer ranging from 1 to 16777215.
all	Unbinds TLP from all interfaces in the IP FPM statistical system.	-

Parameter

Description

Value

tlp-id

Specifies a TLP ID.

The value is an integer ranging from 1 to 16777215.

all

Unbinds TLP from all interfaces in the IP FPM statistical system.

Views

100GE interface view, 10GE interface view, 25GE interface view, 40GE interface view, Eth-Trunk interface view, GE optical interface view, GE electrical interface view, Global VE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipfpm	write

Usage Guidelines

Usage Scenario

Before implementing IP FPM performance statistics, ensure that TLPs are bound to interfaces.

Precautions

A TLP can be bound to only one interface on the DCPs associated with an MCP.

Example

# Bind GE 0/1/0 to TLP100.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet0/1/0
[~HUAWEI-GigabitEthernet0/1/0] ipfpm tlp 100