default-cost (RIP view)

Function

The default-cost command sets the default cost for imported routes.

The undo default-cost command sets the default cost to 0 for imported routes.

By default, the cost for imported routes is 0.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

default-cost cost

undo default-cost

Parameters

Parameter	Description	Value
cost	Specifies the default cost for imported routes.	The value is an integer ranging from 0 to 15.

Parameter

Description

Value

cost

Specifies the default cost for imported routes.

The value is an integer ranging from 0 to 15.

Views

RIP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rip	write

Usage Guidelines

Usage Scenario

You can run one of the following commands to set the cost for imported routes and the costs configured using the commands are in descending order of priorities.

apply cost
import-route (RIP)
default-cost (RIP)

Example

# Set the default cost for imported routes to 2.

<HUAWEI> system-view
[~HUAWEI] rip 1
[*HUAWEI-rip-1] default-cost 2