default-cost (OSPFv3 area view)

Function

The default-cost command specifies the cost of the default route that is sent to the stub area by OSPFv3.

The undo default-cost command restores the cost.

By default, the cost of the default route that is sent to the stub area by OSPFv3 is 1.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

default-cost costval

undo default-cost

Parameters

Parameter	Description	Value
costval	Specifies the cost of the default route that is sent to the stub area by OSPFv3.	The value ranges from 0 to 16777214.

Parameter

Description

Value

costval

Specifies the cost of the default route that is sent to the stub area by OSPFv3.

The value ranges from 0 to 16777214.

Views

OSPFv3 area view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

If multiple OSPFv3 processes are enabled, the command takes effect only on this process.

Example

# Set the area 1 as the stub area and the cost of the default route that is sent to the stub area to 60.

<HUAWEI> system-view
[~HUAWEI] ospfv3 1
[*HUAWEI-ospfv3-1] area 1
[*HUAWEI-ospfv3-1-area-0.0.0.1] stub
[*HUAWEI-ospfv3-1-area-0.0.0.1] default-cost 60