description (Route-policy view)

Function

The description command configures a description for a route-policy.

The undo description command deletes the description of a route-policy.

By default, no description is configured for a route-policy.

Format

description description

undo description

Parameters

Parameter	Description	Value
description	Specifies the description of a route-policy.	The value is a string of 1 to 80 case-sensitive characters, spaces supported.

Parameter

Description

Value

description

Specifies the description of a route-policy.

The value is a string of 1 to 80 case-sensitive characters, spaces supported.

Views

Route-policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
route-base	write

Usage Guidelines

Usage Scenario

To configure a description for a created route-policy, run the description command. If multiple route-policies have been configured, configuring descriptions for the policies will facilitate policy management.

Prerequisites

A route-policy has been configured using the route-policy command.

Example

# Configure a description for the route-policy named temp.

<HUAWEI> system-view
[~HUAWEI] route-policy temp permit node 10
[*HUAWEI-route-policy] description This policy-name is temp