description(Traffic classifier view)

Function

The description command in the traffic classifier view, you can add a description to the current traffic classifier to indicate the specific configuration and use of the traffic classifier.

The undo description command deletes the description of the traffic classifier.

By default, there is no description adding for the current configured traffic classifier.

Format

description information

undo description

Parameters

Parameter	Description	Value
information	Specifies the use of the traffic classifier.	The value is a string of 1 to 127 case-sensitive characters that may include spaces.

Parameter

Description

Value

information

Specifies the use of the traffic classifier.

The value is a string of 1 to 127 case-sensitive characters that may include spaces.

Views

Traffic classifier view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mqc	write

Usage Guidelines

Usage Scenario

If the name of a traffic classifier cannot provide the detailed information about the traffic classifier, you can add the detailed information through the description command.

Prerequisites

A traffic classifier is defined and the traffic classifier view is displayed.

Example

# Add a description to the traffic classifier tc1.

<HUAWEI> system-view
[~HUAWEI] traffic classifier tc1
[*HUAWEI-classifier-tc1] description This classifier is a test traffic classifier