description (ACL6 view)

Function

The description command configures a description for an ACL6.

The undo description command restores the default description of an ACL6.

By default, no description is configured for an ACL6.

Format

description text

undo description

Parameters

Parameter	Description	Value
text	Specifies the description of an ACL6.	The value is a string of 1 to 127 case-sensitive characters, spaces supported. The value must not start with spaces and can be a combination of letters, numbers, and spaces.

Parameter

Description

Value

text

Specifies the description of an ACL6.

The value is a string of 1 to 127 case-sensitive characters, spaces supported. The value must not start with spaces and can be a combination of letters, numbers, and spaces.

Views

UCL6 view, Interface-based ACL6 view, Basic ACL6 view, Advanced ACL6 view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
acl	write

Usage Guidelines

Usage Scenario

The description command configures a description for an ACL6 in any of the following situations:

A large number of ACL6s are configured, and their functions are difficult to identify.
An ACL6 is used at a long interval, and its function may be left forgotten.
Names of named ACL6s cannot fully explain the ACL6s' functions.

Precautions

If the description of an ACL6 is not configured, the ACL6 may be misunderstood or misused.

Example

# Configure a description for an ACL6 numbered 3100.

<HUAWEI> system-view
[~HUAWEI] acl ipv6 3100
[*HUAWEI-acl6-advance-3100] description This acl is used in GigabitEthernet 0/1/0