dhcp-server giaddr

Function

The dhcp-server giaddr command configures the GiAddr address of packets sent by a DHCPv4 server group.

The undo dhcp-server giaddr command restores the default setting.

By default, the GiAddr address of packets sent by a DHCPv4 server group is a gateway address.

This command is supported only on the NetEngine 8000 F1A.

Format

dhcp-server giaddr interface { interface-name | interface-type interface-number } [ forward-rui-slave ]

dhcp-server giaddr interface { interface-name | interface-type interface-number }

undo dhcp-server giaddr

Parameters

Parameter	Description	Value
forward-rui-slave	Forward rui slave.	-
interface interface-number	Specifies the number of the interface.	-
interface interface-type	Specifies the type of the interface.	-
interface interface-name	Specifies the name of the interface.	-

Views

DHCP group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dhcp	write

Usage Guidelines

Usage Scenario

Through the dhcp-server giaddr command changes the GiAddr address of packets sent by a DHCPv4 server group.

Precautions

In VS mode, this command is supported only by the admin VS.

Ensure that the configured GiAddr address does not conflict with the user IP address, the IP address requested by the dynamic address pool, or the IP address configured in another address pool.

Example

# Set the IP address of GE 0/1/1 as the GiAddr address of the packet sent from the DHCPv4 server group named huawei in the DHCPv4 server group view.

<HUAWEI> system-view
[~HUAWEI] dhcp-server group huawei
[*HUAWEI-dhcp-server-group-huawei] commit
[~HUAWEI-dhcp-server-group-huawei] dhcp-server giaddr interface GigabitEthernet 0/1/1