dhcp-server group(IP address pool view)

Function

The dhcp-server group command associates the address pool with the DHCPv4 server group.

The undo dhcp-server group command removes the association between the address pool and the DHCPv4 server group.

By default, the address pool with the DHCPv4 server group is not associated.

This command is supported only on the NetEngine 8000 F1A.

Format

dhcp-server group group-name

undo dhcp-server group

Parameters

Parameter Description Value
group-name

Specifies the name of the DHCPv4 server group.

The value is a string of 1-32 case-insensitive characters.

Views

IP address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
ippool write

Usage Guidelines

Usage Scenario

This command is applicable to only the remote address pool.

To associate a DHCPv4 server with an address pool, you must create the DHCPv4 server group by using the dhcp-server group command in the system view.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Associate the remote address pool rpool with the DHCPv4 server group huawei.
<HUAWEI> system-view
[~HUAWEI] dhcp-server group huawei
[*HUAWEI-dhcp-server group huawei] quit
[*HUAWEI] commit
[~HUAWEI] ip pool rpool bas remote
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-rpool] commit
[~HUAWEI-ip-pool-rpool] gateway 10.10.110.1 255.255.255.0
[~HUAWEI-ip-pool-rpool] dhcp-server group huawei
Parent Topic: IPv4 Address Management Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >