dhcp option82 rebuild enable (Bridge domain view)

Function

The dhcp option82 rebuild enable command enables a device to forcibly insert Option 82 into DHCP packets.

The undo dhcp option82 rebuild enable command disables a device from forcibly inserting Option 82 into DHCP packets.

By default, a device is disabled from forcibly inserting Option 82 into DHCP packets.

Format

dhcp option82 rebuild enable

undo dhcp option82 rebuild enable

Parameters

None

Views

Bridge domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dhcp	write

Usage Guidelines

Usage Scenario

The Option field in a DHCP packet carries control information and parameters that are not defined in certain common protocols. The Option field consists of the Code, Length, and Value fields. The Option 82 field is an Option field with the Code value 82.

The Option 82 field contains the location information of DHCP hosts, such as information about login interface, VLAN, and address. The Option 82 field helps create DHCP snooping binding entries with accurate interface information. Based on the Option 82 field, the DHCP server assigns IP addresses and policies for DHCP clients. For example, the DHCP server assigns IP addresses in a network segment for the clients that log in from GE 0/1/1. The DHCP server assigns IP addresses in another network segment for the clients that log in from GE 0/1/2.

Configuration Impact

After the dhcp option82 rebuild enable command is run, the device inserts the Option 82 field into a DHCP packet if no Option 82 field exists in the packet. If the Option 82 field exists in a DHCP packet, the device deletes the Option 82 field and inserts a new Option 82 field into the packet.
If the dhcp option82 rebuild enable command and the dhcp option82 insert enable (BD view) command are run in the BD view, the later configuration takes effect.

Precautions

Only the device on which DHCP snooping or DHCP relay is configured can be enabled to forcibly insert Option 82 into DHCP packets.

Example

# Enable a device in BD 10 to forcibly insert Option 82 into DHCP packets.

<HUAWEI> system-view
[~HUAWEI] bridge-domain 10
[*HUAWEI-bd10] dhcp option82 rebuild enable