dhcp relay unnumbered table write-delay

Function

The dhcp relay unnumbered table write-delay command sets an interval for storing user entries on a DHCP relay agent.

The undo dhcp relay unnumbered table write-delay command restores the default setting.

By default, the interval for storing user entries on a DHCP relay agent is 300s.

dhcp relay unnumbered table write-delay interval-value

undo dhcp relay unnumbered table write-delay [ interval-value ]

Parameter	Description	Value
interval-value	Specifies the interval for storing user entries on a DHCP relay agent.	The value is an integer ranging from 300 to 86400, in seconds.

Parameter

Description

Value

interval-value

Specifies the interval for storing user entries on a DHCP relay agent.

The value is an integer ranging from 300 to 86400, in seconds.

System view

2: Configuration level

Task Name	Operations
dhcp	write

Usage Scenario

To set an interval for storing user entries on a DHCP relay agent, run the dhcp relay unnumbered table write-delay command.

Prerequisites

The DHCP relay agent has been enabled to store user entries using the dhcp relay unnumbered table autosave command.

# Set the interval for storing user entries on the DHCP relay agent to 700s.

<HUAWEI> system-view
[~HUAWEI] dhcp relay unnumbered table write-delay 700