dhcpv6 option-priority radius domain pool

Function

The dhcpv6 option-priority radius domain pool command configures the highest, medium, and lowest priorities for the DHCPv6 Option delivered by the RADIUS server, configured in the domain view, and configured in the address pool view, respectively.

The undo dhcpv6 option-priority radius domain pool command restores the default configuration.

By default, the DHCPv6 Option configured in the address pool view has the highest priority, the DHCPv6 Option delivered by the RADIUS server has the medium priority, and the DHCPv6 Option configured in the domain view has the lowest priority.

This command is supported only on the NetEngine 8000 F1A.

Format

dhcpv6 option-priority radius domain pool

undo dhcpv6 option-priority radius domain pool

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipv6pool	write

Usage Guidelines

Usage Scenario

If the DHCPv6 Option is configured in the domain view and in the address pool view and delivered by the RADIUS server, you can run the dhcpv6 option-priority command to configure priorities for the DHCPv6 Option.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the highest, medium, and lowest priorities for the DHCPv6 Option delivered by the RADIUS server, configured in the domain view, and configured in the address pool view, respectively.

<HUAWEI> system-view
[~HUAWEI] dhcpv6 option-priority radius domain pool