dhcpv6 solicit-speed-threshold

Function

The dhcpv6 solicit-speed-threshold command configures the speed threshold at which solicit packets are received.

The undo dhcpv6 solicit-speed-threshold command deletes the speed threshold at which solicit packets are received.

By default, the speed at which solicit packets are received is not specified.

This command is supported only on the NetEngine 8000 F1A.

dhcpv6 solicit-speed-threshold threshold-value value

undo dhcpv6 solicit-speed-threshold

Parameter	Description	Value
threshold-value	Specifies the maximum number of solicit packets that are received within a specified time period.	The value of is an integer ranging from 1 to 3000.
value	Specifies the time period.	The value is an integer ranging from 1 to 10.

Parameter

Description

Value

threshold-value

Specifies the maximum number of solicit packets that are received within a specified time period.

The value of is an integer ranging from 1 to 3000.

value

Specifies the time period.

The value is an integer ranging from 1 to 10.

System view

2: Configuration level

Task Name	Operations
ipv6pool	write

Usage Scenario

The dhcpv6 solicit-speed-threshold command is used when the speed at which users go online needs to be limited.

Configuration Impact

The more solicit packets are received within a specified time period, the faster users go online.

Precautions

In VS mode, this command is supported only by the admin VS.

# Configure the speed threshold at which a maximum of 100 solicit packets are received to 3 seconds.

<HUAWEI> system-view
[~HUAWEI] dhcpv6 solicit-speed-threshold 100 3