dhcpv6 relay server group

Function

The dhcpv6 relay server group command configures a DHCPv6 relay server group and enters the group view.

The undo dhcpv6 relay server group command deletes a DHCPv6 relay server group.

By default, no DHCPv6 relay server group is configured.

Format

dhcpv6 relay server group group-name

undo dhcpv6 relay server group group-name

Parameters

Parameter	Description	Value
group-name	Specifies the name of a DHCPv6 relay server group.	The value is a string of 1 to 32 case-sensitive characters, spaces not supported. When quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

group-name

Specifies the name of a DHCPv6 relay server group.

The value is a string of 1 to 32 case-sensitive characters, spaces not supported. When quotation marks are used around the string, spaces are allowed in the string.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dhcp	write

Usage Guidelines

Usage Scenario

A DHCPv6 relay server group is a set of DHCPv6 relay servers. If you want to enable DHCPv6 relay on multiple interfaces and specify the same DHCPv6 relay servers for these interfaces, run the dhcpv6 relay server group command to configure a DHCPv6 relay server group and run the dhcpv6 relay binding server group command to bind the interfaces to the server group. This simplifies configuration.

Precautions

A maximum of 10 DHCPv6 relay server groups can be configured on a device.

You cannot run the undo dhcpv6 relay server group command to delete a DHCPv6 relay server group that has been bound to interfaces.

Example

# Configure a DHCPv6 relay server group.

<HUAWEI> system-view
[~HUAWEI] dhcpv6 relay server group group1