server

Function

The server command adds a server to a DHCPv6 relay server group.

The undo server command deletes a specified or all servers from a DHCPv6 relay server group.

By default, a DHCPv6 relay server group does not have any server.

server server-addr

undo server { server-addr | all }

Parameter	Description	Value
server-addr	Specifies the IPv6 address of a DHCPv6 relay server.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
all	Deletes all DHCPv6 relay servers.	-

Parameter

Description

Value

server-addr

Specifies the IPv6 address of a DHCPv6 relay server.

The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

all

Deletes all DHCPv6 relay servers.

DHCPv6 relay server group view

2: Configuration level

Task Name	Operations
dhcp	write

Usage Scenario

To add a server to a DHCPv6 relay server group, run the server command.

Prerequisites

A DHCPv6 relay server group has been configured using the dhcpv6 relay server group command in the system view.

Precautions

A maximum of 20 servers can be added to a DHCPv6 relay server group.

A server can be added to different DHCPv6 relay server groups.

# Add a server to DHCPv6 relay server group 1.

<HUAWEI> system-view
[~HUAWEI] dhcpv6 relay server group group1
[*HUAWEI-dhcpv6-relay-server-group-group1] server 2001:db8::1