diameter-server group

Function

The diameter-server group command creates a Diameter server group or displays the view of an existing Diameter server group.

The undo diameter-server group command deletes a Diameter server group.

By default, Diameter server groups are not configured.

This command is supported only on the NetEngine 8000 F1A.

Format

diameter-server group diameter-group-name

undo diameter-server group diameter-group-name

Parameters

Parameter	Description	Value
group diameter-group-name	Specifies the name of a Diameter server group.	The name is a string of 1 to 32 case-insensitive characters.

Parameter

Description

Value

group diameter-group-name

Specifies the name of a Diameter server group.

The name is a string of 1 to 32 case-insensitive characters.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
diameter	write

Usage Guidelines

Usage Scenario

The device can manage users based on a policy delivered by a policy server. Policy delivery is implemented by the Diameter protocol running between the NetEngine 8000 F and the policy server. Before using the Diameter protocol for policy delivery, you need to configure some basic information about the Diameter client and server.

The diameter-server group command is used to create a Diameter server group and display its view. A link between the Diameter client and the Diameter server needs to be set up in that view.

Prerequisites

The Diameter protocol has been enabled on the device.

Configuration Impact

If no Diameter server group has been configured, run the diameter-server group command to create one. If a Diameter server group has been configured, run the same command to enter the view of the group.

Follow-up Procedure

Set up a link between the Diameter client and the Diameter server.

Precautions

A maximum of 1024 Diameter server groups can be configured on the device. If a Diameter server group is bound to an AAA domain, it cannot be deleted unless it is unbound from the AAA domain.

In VS mode, this command is supported only by the admin VS.

Example

# Create a Diameter server group named huawei.

<HUAWEI> system-view
[~HUAWEI] diameter enable
[~HUAWEI] diameter-server group huawei