diameter case-sensitive

Function

The diameter case-sensitive predefined-rule edsg command enables a device to distinguish between uppercase and lowercase names of predefined EDSG rules sent by a Diameter server.

The undo diameter case-sensitive predefined-rule edsg command disables a device from distinguishing between uppercase and lowercase names of predefined EDSG rules sent by a Diameter server.

By default, a device does not distinguish between uppercase and lowercase names of predefined EDSG rules sent by a Diameter server.

This command is supported only on the NetEngine 8000 F1A.

Format

diameter case-sensitive predefined-rule edsg

undo diameter case-sensitive predefined-rule edsg

Parameters

None

Views

Diameter server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

To enable a device to distinguish between uppercase and lowercase names of predefined EDSG rules sent by a Diameter server, run the diameter case-sensitive predefined-rule edsg command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable a device to distinguish between uppercase and lowercase names of predefined EDSG rules sent by a Diameter server in the view of a Diameter server group named huawei.

<HUAWEI> system-view
[~HUAWEI] diameter enable
[~HUAWEI] diameter-server group huawei
[~HUAWEI-diameter-group-huawei] diameter case-sensitive predefined-rule edsg