The display mpls te tunnel path expanded command displays expanded path attributes of a tunnel on the local node.
Parameter | Description | Value |
---|---|---|
ingress-lsr-id |
Specifies the ingress LSR ID. |
This value is in dotted decimal notation. |
session-id |
Specifies a session ID. |
The value is an integer ranging from 0 to 65535. |
local-lsp-id |
Specifies the LSP ID value. |
The value is an integer ranging from 0 to 65535. |
tunnel-name tunnel-name |
Specifies the tunnel name. |
The value is a string of 1 to 255 case-sensitive characters, spaces not supported. |
lsp-id |
Displays information about a specified P2MP TE tunnel. |
- |
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display mpls te tunnel path expanded tunnel-name A2
Tunnel Interface Name : A2
Lsp ID : 10.6.6.6 :1 :11
Hop Information
Hop 0 10.6.6.6
Hop 1 10.4.0.6 Local-Protection available
Hop 2 10.4.0.4 Label 1032
Hop 3 10.44.4.4
Hop 4 10.34.0.4
Hop 5 10.34.0.3 Label 1032
Hop 6 10.33.3.3 Label 1032
Hop 7 10.31.0.3
Hop 8 10.31.0.1 Label 1032
Hop 9 10.11.1.1 Label 1032
Item | Description |
---|---|
Tunnel Interface Name | Name of a tunnel interface. |
Lsp ID | LSP ID of the tunnel ingress. |
Hop Information | Number and IP address of each hop. |